Basic Operations; Playback; Switching Input And Adjusting The Volume - Onkyo A-9130 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Playback

Switching input and adjusting the
volume
1
2
16
INPUT
Perform the following procedure when the unit is on.
1. Press INPUTD/C on the remote controller to switch to
the input with the same name as the jack to which you
have connected the player.
For example, switch to D1 to play the device connected to
the DIGITAL IN COAXIAL D1 jack.
When operating on the main unit, turn the INPUT dial to
switch the input.
0 The indicator for the selected input source lights.
0 If there is no digital audio signal input while D1 or D2 is
selected, the indicator blinks while the source is
selected.
2. Start play on the connected player.
3. Press VOLUME on the remote controller or turn the
volume controller on the main unit to adjust the volume.

Basic Operations

VOLUME

Publicité

Table des Matières
loading

Table des Matières