Tunze Multicontroller 7097 Mode D'emploi page 62

1
2
4
5
6
122
3
7
8
light options channel 1" (oder 2, 3, 4) – light options
"
The following options for each light channel can be clicked on in the
Clicking on the real time testing" (2) - LED-test - enables the individual testing of every TUNZE
"
function automatically activates the cursors white, blue and red (3), which can then be set. This function doesn't
require a confirmation through send to unit".
"
Clicking on the light demo"(4) – demonstration of the TUNZE
"
sale of TUNZE LEDs in shops. The lamp is permanently dimmed up and down between 0% and set light intensity
®
specified here (3), depending on the setting of the cursor.
Clicking on the lighting while storm" (5) – lightning simulation during the storm for the desedimentation – is an option
"
that runs simultaneously with the pump program. Only a blue and a white LED will be used.
real time clock" – correct time in the Multicontroller
"
The real time in your computer is synchronized with the Multicontroller in the
in the computer is now displayed in this field.
switched socket outlet 1" (oder 2, 3, 4) – switching of aquarium lights with a switched socket
"
outlet
A separate TUNZE switching socket 7097.120 can be connected to a desired channel in order to switch additional
®
aquarium lighting on and off.
The Multicontroller 7097 automatically detects whether a Turbelle
is connected, i.e. the connected channel is automatically allocated to
a Y-adapter cable 7090.300 can be used to connect a pump and a switching socket to a single channel.
In the field switched socket outlet 1" (2, 3, 4) (7) it is possible to enter the lighting times by clicking on the hours and
"
minutes (8). If there is no interruption of the lighting times, the bottom frame should contain the same times, e.g. "12
p.m. to 12 p.m.".
light options" field (1):
"
LED color. The
®
LED – is a function that is designed especially for the
®
real time clock" field (6). The real time
"
pump, TUNZE LED or switching socket 7097.120
® ®
Pump control" or Light control". For example,
" "
123