Publicité
Les langues disponibles
Les langues disponibles
SETTING UP THE RACING WHEEL FOR P
1. Connect the pedal set to its connector (19) located at the rear of the racing wheel's base.
2. Connect the T-TURBO power supply (21) to its connector (17).
3. Connect the power supply cable (22) to the T-TURBO power supply, and plug the cable into an
electrical outlet with the same voltage.
4. Set the USB sliding switch (11) to the "OTHER" or "GT" position, depending on the PS4™ game
you are using.
5. Connect the removable USB cable (23) to its connector (18) and to one of the USB ports on the
PS4™ system.
6. Once your PS4™ system is powered on, your racing wheel will calibrate itself .
7. Press the PS button (9) on the racing wheel, and log in to your Sony Entertainment Network
account in order for your wheel to be functional.
You are now ready to play!
Important notes:
- Don't forget to press the PS button (9) on the racing wheel, in order for your wheel to be
functional.
- The USB sliding switch (11) on the wheel's base must always be set to the proper position
("OTHER" or "GT") before connecting the racing wheel's USB cable to your system.
To change the sliding switch's position: disconnect the USB cable, and then set the switch to
the appropriate position before reconnecting the USB cable to the system.
- The list of PlayStation
the USB sliding switch (11) according to the game you are using) is available here:
http://support.thrustmaster.com (in the Racing Wheels/T-GT section). This list is updated
regularly.
USB SLIDING SWITCH (11) IN THE "OTHER" POSITION
FOR PS4™ GAMES APART FROM GT SPORT
When the USB sliding switch (11) is set to the "OTHER" position:
* The wheel is recognized in most games as a T300 RS wheel.
* The 4 rotary selectors with Push function (5) are not functional.
* The 2 mini-sticks (6) are not functional.
* The Force Feedback system is functional, but the T-DFB effects system (16) is not.
USB SLIDING SWITCH (11) IN THE "GT" POSITION
FOR THE GAME GT SPORT (AND OTHER FUTURE GT GAMES)
When the USB sliding switch (11) is set to the "GT" position:
* The wheel is recognized as a T-GT wheel.
* The 4 rotary selectors with Push function (5) are functional.
* The 2 mini-sticks (6) are functional.
* The Force Feedback system, and the T-DFB effects system (16), are both functional at the same
time. In the GT Sport game's options, the power level of each system can be adjusted independently.
4 games compatible with the T-GT (along with the required position for
®
11/24
S
4
LAY
TATION®
Publicité
