Starting And Adjusting The Watch - Pierre DeRoche Chrono Penta PDR 4012 Mode D'emploi

Starting and adjusting the watch

1. Unscrew the crown by turning it anti-clockwise.
2. Wind the watch manually with the crown in position "A"; turn the crown
clockwise around 30 times. The watch will then automatically rewind
thanks to your wrist movements.
3. Pull the winding stem out to position "C" (the movement stops); turn the
crown anti-clockwise until the date changes and the hands are between 2
am and 4 am.
4. Push the winding stem in again to position "B"; perform rapid date adjust-
ment by rotating the crown anti-clockwise until the required date appears
in the window.
5. Pull the winding stem out again to position "C"; turn the crown in whiche-
ver direction is required until the desired time appears.
6. Push the winding stem back in to position "A" (to restart the movement).
7. Press the crown lightly towards the case and screw the crown in again by
turning it clockwise.
12