Technische Daten - Klauke Multi Mode D'emploi

Bedienungsanleitung EK 60 UNV
______________________________________________________________________________________________________________________

8. Technische Daten

Gewicht des kompl. Gerätes: ca. 4,5 kg (inklusive Akku)
Antriebskraft:
Akkuspannung:
Akkukapazität:
Akku-Ladezeit:
Preßzeit:
Pressungen pro Akku:
Größter schneidbarer Kabel∅: 40 mm
Schneidzeit:
Schnitte pro Akku:
Stanzzeit:
Kapazität:
Umgebungstemperatur:
Schalldruckpegel:
Vibrationen:
Maße:
Anmerkung
Diese Bedienungsanleitung kann jederzeit unter der Art.-Nr.
HE.7569_H nachbestellt werden.
ca. 60 kN
12 V
3 Ah (RA5)
ca. 1 h (LG4F), bzw.
¼ h mit Schnelladegerät (LG5)
5 s bis 8 s
(abhängig vom Verbinderquerschnitt)
ca. 125 Pressungen
(Cu 150 mm² DIN 46235)
8 s bis 20 s
(abhängig vom Kabelquerschnitt)
ca. 75 Schnitte (4 x 70 mm² NYY)
5 s bei ∅ 22,5 mm, 3 mm St37
12 s bei ∅ 60 mm, 3 mm St37
• 60 Stanzungen/Akku
bei ∅ 60 mm in 3 mm Blech St37,
• 170 Stanzungen/Akku
bei ∅ 22,5 mm in 3 mm Blech St37.
-20°C bis +40°C
70 dB (A) in 1m Abstand
< 2,5 m/s²
(gewichteter Effektivwert der
Beschleunigung)
Siehe Bild 7
Instruction Manual
for the electric-hydraulic universal unit,
Serial-No. ..........................
Index
1 Introduction
2 Labels
3 Warranty
4 Description of the electric-hydraulic universal unit
4.1 Description of the components
4.2 Brief description of the important features of the unit
4.3 Description of the light diode display
5 Remarks in respect of the determined use
5.1 Operation of the unit
5.1.1 Use of the crimping dies
5.1.2 Use of the cutting dies
5.1.3 Use of the punch adapter
5.2 Explanation of the application range
5.3 Mounting instructions
5.4 Service and Maintenance instructions
5.5 Remarks on the use of the Battery Cartridge and Charger
5.6 Storage and transport of the crimping unit.
6 Troubleshooting
7 Putting out of operation/waste disposal
8 Technical data
Symbols
Safety warnings
Please do not disregard these instructions in order to
avoid human injuries and environmental damages.
Operational warnings
Please do not disregard them to avoid damaging the pump
unit.
1. Introduction
Before starting to use the tool please read the
instruction manual carefully.
Use this tool exclusively for its determined use.
Mounting and assembly of connecting material with the help of this tool
must only be performed by specially trained personnel. The minimum
age is 16 years.
This instruction manual has to be carried along during the entire life
span of that tool.
The operator has
- to guaranty the availability of the instruction manual for the user and
- to make sure, that the user has read and understood the instruction
manual.
2. Labels
On the labels fixed on the housing of the tool you'll find the type
specification, name of the manufacturer and the company logo. On the
opposite side of the housing you'll find a label with technical data. The
serial number is on the hydraulic cylinder between the housing and the
head. On the head you'll find a warning against crimping and cutting
hazards.
3. Warranty
If correct operation is guaranteed our warranty is 6 months from the time
of delivery unless otherwise specified by local guidelines and law.
4. Description of the electric-hydraulic universal unit
4.1. Description of the components
The electric-hydraulic universal unit is a hand held tool and consists of
the following components:
Seite 8