Removing The Mecablitz From The Camera; Power Supply; Suitable Batteries - Metz MECABLITZ 36 AF-3 C Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

3.2 Removing the mecablitz from the camera

Turn off the camera and the mecablitz by their main
switch.
mecablitz 36 AF-3 C/4 C and 36 AF-3 N
• Turn the knurled nut against the mecablitz housing until
the stop point is reached.
• Withdraw the mecablitz from the camera's accessory
shoe.
mecablitz 36 AF-3 M
• Press the unlatching button "PUSH" towards the flash unit
and at the same time hold it lightly down until the "PUSH"
button locks in place.
• Withdraw the mecablitz from the camera's accessory
shoe.
74

4. Power supply

4.1 Suitable batteries

The mecablitz can be operated with any of the following
batteries:
• 4 NiCad batteries, type IEC KR 15/51. They permit very
fast recycling and are economical in use because they are
rechargeable.
• 4 nickel metal hydride batteries. They have a significantly
higher capacity than NiCad batteries and are less harm-
ful to the environment (no cadmium).
• 4 alkaline manganese dry-cell batteries, type IEC LR6.
Maintenance-free power source for moderate power re-
quirements.
Do not use lithium batteries! Their higher cell voltage
may damage the electronic system of the flash unit.
Remove the batteries from the mecablitz if the flash unit is
not going to be used for an extended period of time.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mecablitz 36 af-3 mMecablitz 36 af-3 nMecablitz 36 af-4 c

Table des Matières