Range display in manual flash mode
In manual flash mode , the distance that
M
must be maintained from the subject for
7,9 m
correct flash exposure is indicated.
Adjustment to the photographic situation at
Z
m
F4.0
35
OOM
m
hand can be achieved by, for example,
INFO
1/1
changing the aperture setting on the lens or
selecting a manual partial light output level
(see 7.3).
Exceeding the display range
Flash ranges of up to 99 m or 99 ft can be
TTL
shown in the display.
4
-99 m
9,0
This display range can be exceeded in the
case of high ISO values and large aperture
m
Z
F1.0
35
OOM
m
openings.
EV
INFO
An arrow or triangle after the distance value
indicates that the display range has been
exceeded.
All manuals and user guides at all-guides.com
M
6 Displays in the camera
viewfinder
Examples for the camera viewfinder display:
The flash symbol flashes prior to the shot
being taken
The capacitor in the flash unit is being
charged. The flash unit is not yet flash-ready.
The flash symbol lights up
The capacitor in the flash unit is fully
charged. The flash unit is ready for use.
For information applicable to the displays in
the viewfinder of your camera model, refer to
the camera's operating instructions!
Incorrect exposure guidelines:
• overexposure: do not use the flash!
• underexposure: switch the flash on or use a
tripod and a longer exposure time.
Reasons for incorrect exposure can lay in
the various exposure and automatic
programmes.
For information applicable to the displays in
the viewfinder of your camera model, refer to
the camera's operating instructions!
k
151