Publicité
80
Mounting the mecablitz
Montaggio del mecablitz
Montaje del mecablitz
2.2 Connection to the camera
The mecablitz is triggered via the hot shoe contact in the
camera's flash shoe.
If the camera's flash shoe does not have a hot shoe contact
then a synchronising cable (optional accessory) can be used
to establish the link between the camera's X socket and the
sync socket of the mecablitz.
☞
Please note: The mecablitz must be switched off before
the synchronising cable is plugged in or disconnected.
2.3 Removing the mecablitz from the camera
☞
Turn off the camera and the mecablitz by the main
switch.
• Turn the knurled nut against the mecablitz until the stop
point is reached.
• Withdraw the mecablitz from the camera's accessory shoe.
Publicité
Chapitres
