FUAVE ACS18K01 Manuel D'instructions page 42

LED display
The display shows the configured temperature or the timer settings. If the
timer function is used then the display briefly shows the new values after
which the display returns to the configured temperature.
The display also shows the error codes, see further on in this manual.
Safety
The Fuave ACS18K01 is fitted with an overheating safeguard that switches
the unit off if it overheats. If this should occur, you must remove the plug
from the socket and leave the equipment to cool for at least 30 minutes.
Remove the cause of overheating - has the device been (partially) cover-
ed? Is it too close to a wall or another obstacle, preventing it sucking in or
dispelling sufficient air?
You can then use the device normally again but keep an eye on it for the
first 30 minutes to ensure there are no further problems. If the device is
showing signs of problems or the overheating recurs, even though there is
no obvious assignable cause, ask your supplier or a recognised electrician
to check/repair the unit.
3 9