Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Dehumidification
•
To dehumidify you now connect a water discharge hose to the water tap
(see image). You lead this hose to a bucket or drain. The hose cannot go
upwards! Remove the sealing cap before you connect the hose. Store
the sealing cap carefully, you need it for the cooling function.
Cool
•
To cool you do not need to connect a water discharge hose.
•
Check if the sealing cap of the water discharge connection is in place.
•
Attach the air discharge hose before you put the device into use.
•
Rotate the air discharge hose in the direction of arrow 1 and you attach
it to the device. By rotating in the direction of arrow 2 you again remove
the air discharge hose.
3 1
Publicité
Chapitres
Table des Matières
