First Use; Kitchen Timer - ETNA OM948RVS Mode D'emploi

YOUR OVEN

First use

• Open the door, remove all the packaging and check the oven for damage. Don't install the
oven if it is damaged, but contact your supplier.
• Remove the protective film from the casing.
• Clean the oven interior and accessories with a damp cloth. Do not use any abrasive cleaner
or strong-smelling cleaning products.
• Connect the oven to the mains.
When the appliance is connected to mains electricity (for the first time), you will have to
set the clock.
Setting the time
1. Press the '+' and '-' touch keys at the same time.
A cooking symbol will appear in the display. The dot in the middle of the time display will
also flash. You can now set the time of day.
2. Use the '+' and '-' touch keys to set the correct time (while the dot is flashing).
Now wait 5 seconds; the time of day is set automatically. You will hear a beep.
The current time appears in the display and the dot stops flashing.

Kitchen timer

The audible signal of the kitchen timer will only sound after the expiry of the set time. The kitchen
timer will not switch off the oven.
1. Press and hold the 'mode' key until a flashing clock symbol appears in the display.
2. Use the '+' and '-' touch keys to set the correct time.
You will hear a beep.
The time of day appears again in the display and the clock symbol stops flashing.
The time now begins to count down automatically.
When the time has elapsed, an audible signal sounds and the clock symbol flashes.
3. Press any key to switch off the audible signal.
You can see and/or adjust the remaining time of the kitchen timer in the display at any
moment: press the 'mode' key, and the remaining time of the kitchen timer appears in
the display and the clock symbol flashes. Use the '+' and the '-' touch keys to adjust
the time (while the clock symbol is flashing).
EN 10