ETNA OM948RVS Mode D'emploi page 73

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USE
Set end time of the baking process: 19:45.
The oven will start the baking process at 18:30 with the preset temperature and oven
function and will stop at 19:45.
Press the 'mode' key (first long and then short) until 'dur' appears in the display. The
display will now alternate between 'dur' and '0 00' and the 'AUTO' symbol flashes.
11. Use the '+' and '-' touch keys to set the desired duration (while the 'AUTO' symbol flashes).
12. Press the 'mode' key until 'End' appears in the display.
The display will now alternate between 'End' and the earliest possible end time, and the
'AUTO' symbol flashes.
13. Use the '+' and '-' touch keys to set the desired end time (while the 'AUTO'
symbol flashes).
The cooking symbol disappears.
Now wait 5 seconds; the set time is confirmed automatically.
The time of day appears in the display again and the 'AUTO' symbol stops flashing.
14. Select a temperature with the temperature knob and an oven function with the oven
function knob.
The oven automatically switches on when the calculated start time has been reached. The
temperature light for the oven lights up and the cooking symbol appears in the display.
The oven sounds a signal when the end time has been reached. The 'AUTO' symbol starts
flashing and the oven switches off automatically.
15. After the cooking time has elapsed, first turn the temperature knob and the oven function
knob to '0'.
16. Then press any key to switch off the audible signal.
17. Press and hold the 'mode' key to exit the setting.
You can see and/or adjust the remaining baking time or the end time in the display
at any moment: press the 'mode' key until 'dur' or 'End' appears in the display; the
'AUTO' symbol in the display flashes. Use the '+' and the '-' touch keys to adjust the
duration or the end time (while the 'AUTO' symbol is flashing).
If you want to switch off the oven during baking, set the remaining duration of the baking
process to '0 00' and set the temperature knob and the oven function knob to '0'.
EN 13

Publicité

Table des Matières
loading

Table des Matières