ETNA OM948RVS Mode D'emploi page 72

USE
Programming the baking time
1. Select a temperature with the temperature knob and an oven function with the oven
function knob.
2. The temperature light for the oven lights up and the oven is switched on.
3. Press the 'mode' key (first long and then short) until 'dur' appears in the display.
The display will now alternate between 'dur' and '0 00' and 'the AUTO' symbol flashes.
4. Use the '+' and '-' touch keys to set the desired duration (while the 'AUTO' symbol flashes).
5. Now wait 5 seconds; the set time is confirmed automatically.
6. The time of day appears in the display again and the 'AUTO' symbol stops flashing.
7. The oven gives an audible signal when the set time has elapsed. The 'AUTO' symbol starts
flashing and the oven switches off automatically.
8. After the cooking time has elapsed, first turn the temperature knob and the oven function
knob to '0'.
9. Then press any key to switch off the audible signal.
10. Press and hold the 'mode' key to exit the setting.
Programming the end of the baking time
Select a temperature with the temperature knob and an oven function with the oven
function knob.
1. The temperature light for the oven lights up and the oven is switched on.
2. Press the 'mode' key until 'End' appears in the display.
3. The display will now alternate between 'End' and the earliest possible end time, and the
'AUTO' symbol flashes.
4. Use the '+' and '-' touch keys to set the desired end time (while the 'AUTO'
symbol flashes).
5. Now wait 5 seconds; the set time is confirmed automatically.
6. The time of day appears in the display again and the 'AUTO' symbol stops flashing.
7. The oven sounds a signal when the end time has been reached. The 'AUTO' symbol starts
flashing and the oven switches off automatically.
8. After the cooking time has elapsed, first turn the temperature knob and the oven function
knob to '0'.
9. Then press any key to switch off the audible signal.
10. Press and hold the 'mode' key to exit the setting.
Programming the automatic baking process
You can programme the oven to turn on and off automatically by setting a duration and end
time. The oven will calculate the start time and switch off automatically after the end of the
cooking time.
• Example:
▷ Current time: 17:30,
▷ Set duration of the baking process:
▷ 1 hour and 15 minutes,
EN 12