Güde GME 36 ASL Traduction Du Mode D'emploi D'origine page 19

CE marking
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
Safety instructions for Electrical
branch chainsaw
Keep all parts of your body in safe distance from
the saw when running. Before starting the saw,
make sure the saw chain does not touch anything.
A moment of inattention when working with the
chainsaw is able to cause the saw chain to catch your
clothes or parts of your body.
Wear protective glasses and ear protectors.
Further, wearing head, hand and leg protection
equipment is recommended. Suitable protective
clothing minimises the risk of injury by thrown-away
wood chips and possible contact with the saw chain.
Do not work on trees with the chainsaw. There is a
risk of injury when working on a tree.
Provide safe posture at all times and use the
chainsaw only when standing on a solid, safe and
level surface. A slippery or unstable surface, such as
ladder, may lead to loss of balance or loss of control over
the chainsaw.
When cutting a tense branch, be sure to know
that the branch will bounce back. If tension in the
wood fibres gets released, the tense branch may hit
the operator and/or cause a loss of control over the
chainsaw.
Be especially careful when cutting scrubs and
saplings. Thin material may get caught in the chainsaw
and hit you or you may lose your balance.
Carry the chainsaw by the front handle in a
switched-off condition and the saw chain must be
deflected from your body. Fit a protection cover
on the chainsaw whenever it is transported or sto-
red. Careful chainsaw treatment reduces the likelihood
of an accidental contact with the running saw chain.
Other safety instructions
Electrical hazard , keep at least 10 m distance away
from electrical power lines.
Do not run! Immediately remove cut
branches/knots from the work area to prevent inju-
ries. Watch out for falling branches!
Walk! Do not run! As soon as a branch being cut off
starts cracking and falling down, move to the side
immediately and keep safe distance from the falling
wood as it can hurl back up and cause injuries.
Switch the appliance immediately off and remove the
replaceable battery from the appliance when the saw
chain gets blocked. Remove the blocked object.
Maintenance
Take the replaceable battery from the
appliance before any extension, cleaning
and servicing works.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Use only original accessories and original spare parts.
Biodegradable oil for chains to be used only..
Keep the device, in particular the air vents, clean at all
times. Never spray water on the device body!
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Apply environment-friendly oil to all moving parts.
After each use, clean the cutter bar carefully. Wipe it
with a cloth immersed in oil or apply metal treatment
spray on it.
Blunt, bent or damaged knives must be immediately
replaced.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
injuries.
If necessary, a list of spare parts can be found at www.
guede.com.
Machine to be stored in a dry place.
ENGLISH
15