Turning Off The Power - Sony VPL-CX85 Mode D'emploi

Masquer les pouces Voir aussi pour VPL-CX85:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To adjust using the Remote
Commander
Press the TILT/KEYSTONE key on the
Remote Commander to display the Side
Shot menu (horizontal trapezoidal
distortion/H keystone correction) and
adjust the tilt using the M/m/</,
keys.
To adjust using the control panel
Press the SIDE SHOT +/ – key on the
control panel to adjust the distortion.
For details, see ""Side Shot" and "V
Keystone" Adjustments" on page 60.
8
Adjust the size of the picture and the
focus.
To adjust using the Remote
Commander
Select the item to be adjusted by
pressing the LENS key, then adjust with
the M/m/</, key. Each time you
press the key, the menu changes to
LENS FOCUS and LENS ZOOM in
order.
To adjust using the control panel
Press the ZOOM +/– keys on the
projector to adjust the size of the picture
and press the FOCUS+/– keys to adjust
the focus.

Turning Off the Power

1
Press the I /
1
key.
"POWER OFF? Please press I / 1 key
again." appears to confirm that you want
to turn off the power.
Notes
A message disappears if you press any key
except the I / 1 key, or if you do not press
any key for five seconds.
2
Press the I /
1
key again.
The lens protector close and the powered
tilt adjuster is put away in the projector.
The ON/STANDBY indicator flashes in
green and the fan continues to run for
about 60 seconds to reduce the internal
heat. Also, the ON/STANDBY indicator
flashes quickly for the first 45 seconds.
During this time, you will not be able to
light up again the ON/STANDBY
indicator with the I / 1 key.
3
Unplug the AC power cord from the
wall outlet after the fan stops running
and the ON/STANDBY indicator
lights in red.
When you cannot confirm the on-
screen message
When you cannot confirm the on-screen
message in a certain condition, you can turn
off the power by holding the I/ 1 key for
about two seconds instead of steps 1 and 2.
Note
• The internal circuitry of the Off & Go and
Direct Power On/Off functions may cause
the fan to continue to operate for a short time
1
even after the I /
key is pressed to turn off
the power and the ON/STANDBY indicator
changes to red.
25
GB
Projecting

Publicité

Table des Matières
loading

Table des Matières