Publicité
Les langues disponibles
Les langues disponibles
7
ELECTRICAL INSTALLATION WITH CONNECTION CABLE
GROUNDING INSTRUCTIONS This appliance must
be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of
electric shock.
Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician install an outlet
near the appliance.
The supply cord shall be accessible for
inspection after installation.
ELECTRICAL INSTALLATION WITH
OPTIONAL WIRING BOX
For Permanent wiring Installation-Use only
with Listed rangehood Wiring Box kit
sku # WIREBOX, manufactured by Faber.
8
1
For Non-Ducted Recirculation Option
2
Direct Connect Wiring Box
Accessory sku # WIREBOX
(purchased separately)
Attach each charcoal filter to the black
grid on each side of the blower. Press
the charcoal filter tightly to the black
grid on the blower side and rotate the
filter clockwise (towards the front of
the insert hood) until it locks into place.
Turn counterclockwise (towards the
back of the insert hood) to remove.
Required Activated Charcoal Filter
Accessory - sku # - FILTER1
(purchased separately)
Max. 33
"
7/16
11
Publicité
