Publicité
Les langues disponibles
Les langues disponibles
Two examples
Terminal loop for running in a clockwise direction (Fig.
4). The train runs into the terminal loop with the control-
ler set at position 1, stops at the stopping point Hp. The
controller knob is now turned into position 2. The train
can now pull out of the terminal loop without having to
stop again.
If the track sections K and T are interchanged, the run-
ning direction is reversed (counter-clockwise) (Fig. 5).
Track Plan Suggestion for Building a Station within a
Terminal Loop.
In this example, the terminal loop isolation section is
fitted behind the station (Fig. 6). In this way, shunting
may be done in the station without any problem. If a
second terminal loop is built into a layout, it is possible
to turn the train twice.
5
Publicité
