Télécharger Imprimer la page

Chicco 360 Mode D'emploi page 14

Masquer les pouces Voir aussi pour 360:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
HOW TO USE THE SAFETY HARNESS
7. Always remember to fasten the safety harness, passing
it through the plastic "D" rings (diagram 10) and the fabric
crotch strap. After sitting the child into the table seat, fasten
the plastic buckle as shown in diagram 11. Check that the
table seat is fi tted and fi xed correctly into position.
HOW TO ADJUST THE SEAT
The table seat can be adjusted to different positions.
8. To adjust the position of the seat, raise the handle (D)
located on the backrest of the table seat and release the
locking button from the tube (diagram 12). Turn the table
seat in a clockwise or anticlockwise direction (diagram 13),
until the 360° symbol on the movable part of the seat (B) is
in correspondence with the selected symbol, located on the
fi xed part of the table seat (C). When the selected position is
reached, release the handle to insert the locking button into
the hole located on the tube: a click will indicate that the
button is locked correctly into position.
The table seat has six positions of use:
- 1 "FEEDING BOTTLE" position (diagram 14 and 14a), 2
"COOKIE" positions (diagram 15 and 15a/15b): the 360°
indicator is placed in correspondence with the "FEEDING
BOTTLE/BISCUIT" symbol shown on the tube of the seat
(C). The child is facing outwards and is able to drink from the
feeding bottle or eat a snack independently, whilst always
maintaining visual contact with the mother, who is able to
move freely in the surrounding area.
- 2 "CUP" positions (diagrams 16 and 16a/16b): the 360°
indicator is placed in correspondence with the "CUP" symbol
shown on the tube of the seat (C). Weaning is experienced
maintaining appropriate contact between mother and child.
The child is able to independently take the cup from the table,
while the mother is able to assume the correct position with
respect to the baby during feeding.
- 1 "CUTLERY" position (diagrams 17 and 17a): the 360°
indicator is placed in correspondence with the "CUTLERY"
symbol shown on the front part of the fi xed frame (C). Once
the child has acquired greater autonomy, it faces the table
and shares the pleasure of eating together with its mother
and father.
Warning! Do not adjust the table seat to a position that
is different from those for use shown in this instructions
booklet.
The table seat can be adjusted also with the child in place,
although this could be slightly more diffi cult.
HOW TO REMOVE THE COVER
The cover of the table seat can be removed and cleaned.
9. Unfasten the safety harness and remove it from the from
the crotch strap and plastic "D" rings.
10. Unfasten the 4 press studs located on the fabric cover
(diagram 18a and 18b).
11. Remove the plastic "D" rings, sliding them through the
appropriate openings located on the fabric seat.
12. Remove the two rear metal buckles of the seat, sliding
them through the openings located on the backrest, and the
three front metal buckles, sliding them trough the front edge
of the seat (diagram 19a and 19b). The fabric cover can now
be removed.
13. Unfasten the press stud located on the seat (diagram 20)
and remove the HDPE insert.
To replace the fabric cover onto the table seat, proceed as
follows.
14. Place the HDPE insert on the bottom of the seat and
fasten the press stud.
15. Insert the metal buckles through their housings and ensure
they are fi xed correctly, as shown in diagram 21a and 21b.
16. Pass the plastic "D" rings through the appropriate
openings located on the fabric seat.
17. Fasten the press studs of the fabric cover to the table seat
frame.
18. Pass the safety harness through the plastic "D" rings and
the crotch strap. The table seat is now ready for use.
DISASSEMBLY AND TRANSPORT
To dismantle the table seat, proceed as follows.
19. Press the locking buttons located on the armrest (G – H)
and remove them from the seat.
20. Place the seat (A) and the two disassembled arms into the
mesh bag (diagram 22). The product is ready for transport.
FOR FURTHER INFORMATION, PLEASE CONTACT:
Chicco UK Ltd
Prospect Close
Lowmoor Road Business Park
Kirkby in Ashfi eld
Nottinghamshire NG17 7LF
Customer Services Helpline Tel: 01623 750870
(offi ce hours only)
www.chicco.com
14

Publicité

loading