Sony CSS-PHA Mode D'emploi page 12

5
Place the camera on the Cyber-shot Station and turn on the camera.
POWER button
*
You can turn the camera on either by pressing POWER button or rotating
the lens portion for DSC-F88. For further details, see the operating
instructions supplied with the camera.
– Make sure the camera is securely attached to the Cyber-shot Station.
6
"USB Mode Normal" appears on the LCD screen of the camera.
When a USB connection is established for the first time, your computer
automatically runs the used program to recognize the camera. Wait for a
while.
– If "USB Mode Normal" does not appear, press MENU button, select [USB
Connect], and set it to [Normal].
*
During communication, the access indicators turn red.
Do not operate the computer until the indicators turn white.
– During the USB connection, do not remove the camera, the USB cable or
the AC adaptor from the Cyber-shot Station. The image data in the camera
may be damaged.
– For further details, see the operating instructions supplied with the
camera.
12-GB
POWER button
USB Mode
Normal
Switch on
MENU
USB Connect
PictBridge
PTP
Normal
*
Access indicators
*