Table des Matières
Publicité
MODELES FROID SEUL-REVERSIBLES
COOLING ONLY-HEATPUMP MODELS
Voir spécifications de montage détaillées dans la notice d'installation fournie avec le matériel.
See mounting specifications in the installation instructions supplied with the material.
Sustaining brackets
GROUPE DE CONDENSATION - CONDENSING UNIT
SUSPENDU
SUSPENDED
A
Support mural (accessoire)
Wall support (accessory)
B
Support mural (accessoire)
Wall support (accessory)
IMPERATIF
IMPERATIVE : Avoid recycling of air, even partially between suction and discharge.
INSTALLATION
MONTAGE
GROUPE INTERIEUR - INDOOR UNIT
×
AU SOL
ON THE GROUND
A
B
The Air Treatment Units fits into a false ceiling of stan-
dard 600 x 600 mm modules.
Fastening is carried out with threaded rods to be fixed
on clamps which are supplied.
GC XLM 9F / GC 11F / GC 15F
GC 18F/GC 24F
ASPIRATION - SUCTION
SOUFFLAGE - DISCHARGE
12
TH 3710
Shock mount
Washer
Nut
Lock nut
Minimum clearance :
A = 100 mm
Minimum clearance :
B = 150 mm
Publicité
Table des Matières
