Electrical Connection; Models Ct, Ctlp, Cts With External Water Pump - Dometic CT4050 Instructions De Montage

Electrical connection

6 Electrical connection
!
WARNING!
Have the electrical connection carried out by an electrician.
A
NOTICE!
• Do not connect the toilet to the voltage supply directly in parallel
with other power-consuming devices.
• Do not connect the control of the toilet to a pressurised water pump.
• The rated capacity of an external water pump should not exceed
60 W.
I
NOTE
• The external water pump is not included in the scope of delivery.
• A pre-fuse is not necessary, because the toilet is internally fused.
6.1

Models CT, CTLP, CTS with external water pump

A
NOTICE!
• The rated capacity of an external water pump should not exceed
60 W.
• The 12 V connection cable must have a cross-section of at least
1.5 mm
• A 7.5 A automotive fuse is integrated in the toilet control.
➤ Connect the toilet via the main terminal block of the vehicle to its own power
supply (fig. n, page 17).
➤ Connect the external water pump (fig. o, page 18).
30
²
.
CT4000
EN