Reading Custom Mode Data (Custom Mode) - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [VOL] button can be operated
while the system is reading data.
How to operate the Sound Adjustment Mode
Reading custom mode Data
(Custom Mode)
Values (PEQ, time alignment, cross over value)
adjusted using the custom mode on the web site.
Adjust values following the instructions provided
on the E-iSERV operation procedure screen, and
download the data to a memory stick.
Press the [SELECT] (Upper/ Lower)
1
button to select the Custom Mode.
The selected item is highlighted.
2
Press the [ENTER] button.
The mode will change to Custom
mode.
Insert a memory stick containing
3
data.
Press the [SELECT] (Upper/ Lower)
4
button to select ON or OFF.
If a memory stick is not inserted, a
caution appears instead of ON/OFF.
5
Press the [ENTER] button.
Press the [CUSTOM] or [RTN]
6
button to exit sound adjustment
mode.
ATTENTION
• PEQ, time alignment, and crossover values
cannot be adjusted while the custom mode
is on. To adjust values, turn the custom
mode off.
XII
77