Fujitsu Ten Eclipse CD7000 Manuel D'utilisation page 55

12
Press the [ENTER] button.
The selected file will be saved.
"READING" is
reading has finished, [Completed] will
appear on the display and then it will
return to the display for selecting the
function mode.
appears if the system is unable to read
the file.
ATTENTION
<When using a Memory Stick>
• Data downloaded from the E-iSERV (web
site) is saved to folders created in the
Memory Stick as shown below.
MSFTEN
User creation
AREA
XXXXXXXX.ast
• Files that can be imported into your main
unit are created automatically
downloaded from E-iSERV.
• All of searched route map and guidance
information etc. are
automatically created files.
<When using a CD-R>
• The main unit can only import files from CD-
R that have been written in root directories.
XXXXXXXX.ast
• Disc formats that may be used are as
follows:
•CD-ROM (MODE1)
•CD-ROM (MODE2_FORM1)
*CD-ROMs written in MODE2_FORM2 cannot
be read.
• The file names can be changed using 8
alphameric characters (space cannot be
used.)
How to operate the Area Shot function (U.S.A./CANADA only)
displayed. When
[FILE ERROR]
Automatic creation
File extension
when
stored in these
Automatic creation
File extension
CAUTION
• Do not turn the ignition switch or power
to the main unit ON or OFF (or remove
the front panel of the main unit) while
data reading is in progress. Data
reading will be interrupted and data may
be damaged.
• Only the [VOL] button can be operated
while the system is reading data.
X
55