Reading Area Shot Data - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

Various Settings

Reading Area Shot data

The Area Shot data that has been downloaded
from E-iSERV (web site) to a Memory Stick or
CD-R can be loaded into the main unit and saved
there.
Press the [CUSTOM] button for
1
more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/ Lower)
2
button to select FUNC then press
the [ENTER] button.
The function mode is activated.
Press the [SELECT] (Upper/ Lower)
3
button to select the AreaShot.
The selection item will be highlighted.
4
Press the [ENTER] button.
Area Shot setting mode is activated.
Press the [SELECT] (Upper/ Lower)
5
to select the Route Data.
6
Press the [ENTER] button.
The media selection
appears.
Press the [SELECT]
7
Lower) to select the DISC or MS.
8
Press the [ENTER] button.
The panel opens automatically.
Insert the Memory Stick or CD-R to
9
be used for read the Area Shot
data.
54
Press [
10
close the panel.
After the panel is closed, files in the
CD-R or Memory Stick are read.
If there are no correct files on the CD-
R or Memory Stick, "FILE ERROR" is
displayed.
Press the
11
Lower) button to select the saving
file.
screen will
(Upper/
OPEN/EJECT] button to
[SELECT] (Upper/