Adjusting Volume; Switching Rotary Modes; Creating A Shortcut - Fujitsu Ten Eclipse CD7000 Manuel D'utilisation

Adjusting volume

1
Turn the [VOL] button.
Turn to the right: Increases the
volume.
Turn to the left: Decrease the volume.
ATTENTION
Press the [MUTE] button for less than one
second to cut the volume or restore it instantly.
CAUTION
Do not adjust the volume or other controls
while driving the vehicle. Do so only while
parked in a safe location.

Switching Rotary Modes

The function of the [VOL] button can be switched.
When rotary mode is set to ON, the [VOL] button
can be switched from normal volume adjustment
to the following functions:
Source Function
Tuner TUNE UP/DOWN
CD TRACK UP/DOWN
MP3/WMA FILE UP/DOWN
Memory Stick TRACK UP/DOWN
CHANNELUP/
SIRIUS
DOWN
CD changer TRACK UP/DOWN
iPod Track search
For detailed information on the above functions,
see the operation instructions for each related
audio source.
Press the [MODE] button when the
1
main unit is switched to any audio
mode.
Rotary mode will switch ON. When
rotary mode is set to ON, the rotary
indicator will be displayed.
If the [MODE] button is pressed again,
or if no operations are performed for
Names of controls and parts
more than 10 seconds, rotary mode
will be cancelled.

Creating a shortcut

Create a shortcut for frequently-used functions
so that they can be recalled with a single
operation.
A shortcut can be created for one of the following
MENU mode
adjustment mode, display adjustment mode, or
function mode.
Switch the adjustment function
1
that corresponds to the shortcut.
See the explanation for each adjustment
mode for more information on switching them.
• Sound Adjustment Mode: Page 68
• Display Adjustment Mode: Page 78
• Function Mode: Page 84
Press the [CUSTOM] button for
2
more than one second.
A shortcut is created. If the [CUSTOM]
button is held for less than one
second, the previously set adjustment
function will be recalled.
Page
ATTENTION
37
27
• If you attempt to create a shortcut for an
27
invalid hierarchy, the system will beep twice
34
when [CUSTOM] button is pressed for more
than one second.
95
• It may not be possible to operate the
shortcut function in certain audio modes or
91
due to other system settings. In this case,
99
the system will beep twice when [CUSTOM]
button is pressed.
adjustment functions: sound
III
19