Mounting The Minox Acx 100; Mounting The Camera Using The Velcro Pad - Minox ACX 100 Mode D'emploi

low to record videos, the MINOX ACX 100 will auto-
matically stop recording and the right LED will light up
green for 30 seconds. After a further 30 seconds, the
camera will turn itself off.

Mounting the MINOX ACX 100

The MINOX ACX 100 can be used in a variety of situ-
ations. Using the mounting kit included in the scope
of delivery, the MINOX ACX 100 can be mounted on
various types of helmets.
Using the Velcro pad
is ideal to mount the
camera on helmets with
large smooth surfaces
e.g. ski / snowboard
Fig. 5
For helmets with ven-
tilation (e.g. bicycle
helmets), mounting the
camera can be best ac-
complished when using
the Velcro strap.
Mounting the
camera using the
Velcro pad
Peel the two halves of
the Velcro apart and
remove the protective
foils on both halves.
Place one of the halves
lengthwise on the mid-
dle of the helmet and
press firmly, being care-
ful to match the direc-
tion in which the camera
Fig. 6
Fig. 7
Mounting the camera:
Push the adapter carefully
into the mounting bracket
23