Close The Covering; Inserting The Battery; Charging The Battery; Removing The Battery - Minox ACX 100 Mode D'emploi

Close the covering

Fold the covering (8) towards the port and push up
until firmly in place. The MINOX ACX 100 should
always be used when the covering is completely
closed.

Inserting the battery

Insert the battery into the compartment (12) so that
the sticker on the battery is facing towards the USB
port (10) and the golden contacts to the right of the
camera. The battery has been inserted properly if
there has been an audible click.

Charging the battery

Before connecting your MINOX ACX 100 to your com-
puter with the USB cable, make sure it is turned off. As
soon as the camera has been connected, the charging
process will automatically begin and the green LED
on the left (13) will light up. When this LED turns off,
the charging process is finished.

Removing the battery

To release the battery, push the small pin down lo-
cated at the upper right of the battery compartment.
The battery will be released and can now be removed.

Inserting the memory card

Open the covering and insert the memory card into
the SD card slot (11) with the gold contacts facing the
USB port (10). The memory card has been inserted
properly if there has been an audible click.

Removing the memory card

Carefully push the memory card inwards and let go.
The card will then be released and can now be re-
moved.

Setting the resolution

You can choose between two resolutions. If the switch
(9) has been pushed up (HI), the MINOX ACX 100 will
record in the highest resolution (1080p = full HD). If
you wish to record in the lower resolution (720p),
push the switch down (LO).

Attaching the lens covering

Always use the lens covering to protect the lens from
foreign bodies like raindrops, saltwater, dust or sand,
when your MINOX ACX 100 is not in use.
21