Module Alignment; Suggested System Requirements; Set-Up; Open The Covering - Minox ACX 100 Mode D'emploi

Module alignment

In normal recording position, the black dot (2) on the
module tube should be aligned with the arrow (3) on
the camera body (Fig. 2). This position is ideal for
mounting the camera vertically onto helmets, han-
dlebars etc. If vertically mounting the camera is not
possible, the module tube (1) can be turned 90° to
the right or left to adjust the angle of view (Fig. 3). If
the camera is mounted horizontally on the left, turn
the lens tube to the right. If the camera is mounted
horizontally on the right, turn the lens tube to the
left. The black dot on the module tube can be used
for angle orientation.
Fig. 1
20
Fig. 2
We recommend having a second person check the
position of the camera before you begin recording.
Using the MINOX lettering on the top front of the
module tube (1) can also be a help when adjusting
the angle of view

Suggested system requirements

Windows XP, Vista, 7
Windows Media Player 10
DirectX 9.0
3.0 GHz Processor or higher
i5 processor
512 MB RAM
128 MB graphic card
1920 x 1440 screen resolution

Set-up

Open the covering

Open the covering on the back of the camera (8) by
pushing it down and pull the covering out towards
you until it is fully opened.