Güde GSS 400 Traduction Du Mode D'emploi D'origine page 9

Introduction
To enjoy your new machine as long as possible, please read
carefully the Operating Instructions and the attached safety
instructions before using it. Further, we recommend keeping
the Operating Instructions to recall the product features in the
future.
Within the continuous product development, we reserve
the right to make technical changes to improve it.
Any reprints, even partial, are subject to approval.
This document represents translation of the original
Operating Instructions.
Appliance description
Circular saw blade sharpener To sharpen saw discs of hard
metal of diameter 90 - 400 mm.
Pic. 1 and 2:
1. Base board
2. Adjustable arm
3. Wing nut
4. Motor
5. Grinding wheel guard
6. Safety glass
7. Grinding diisc
8. Blade support
9. Angular scale
10. Switch ON/OFF
11. Handle
12. Blade receiver regulator
13. Pin
14. Depth gauge
Technical Data
Circular saw blade sharpener
Connection:
Protection type:
Max. output:
Motor speed:
Grinding wheel:
Grinding wheel setting angel:
Angular adjustment of support table:
Connection cable:
Dimension LxWxH:
Weight:
Use as designated
This product may only be used for grinding/sharpening and
processing carbide tipped saw blades.
The machine cannot be used for works other than for which
the machine has been designed and that are specified in the
Operating Instructions. Any other use is a use in conflict with
the designation. The manufacturer will not be liable for any
consequential damage and injuries. Please be sure to know
that the machine has not been designed for industrial
purposes.
Operator requirements
The operator must carefully read the Operating Instructions
before using the machine.
Qualification
No special qualification is necessary for using the machine
apart from detailed instruction by an expert.
Training
Using the machine only requires appropriate instructions by a
professional or reading the Operating Instructions. No special
training necessary.
#94217
230 V~50 Hz
IP 20
110 W (S3 50%)
-1
5300 min
100 x 10 mm
2x25°
variabel
1,5 m/H05 VV-F
290x280x235 mm
5,4 kg
9
Important basic safety instructions
Before you start working with the appliance please read
carefully the following safety regulations and Operating
Instructions. If any other person is to handle the appliance
provide him/her with the Operating Instructions. Keep the
Operating Instructions for future reference!
Package: The appliance has been put in a package to
prevent any damage during transport. Packages are raw
materials so they can be reused or recycled.
Please read carefully the Operating Instructions and follow
them. Use these Operating Instructions to get acquainted
with the appliance, its corresponding use and safety
instructions. Keep the Instructions for future reference.
•
Inspect the appliance visually before each use. Do not use
the appliance if any safety device is damaged or worn out.
Never remove any safety device.
•
Use the appliance only for the purpose specified in these
Operating Instructions.
• Safety in the workplace is your responsibility.
•
Work only with sufficient lighting conditions.
•
Never leave the appliance unattended.
•
Put the appliance to a safe place if you need to interrupt
your work.
•
Protect against humidity and rain.
•
Do not switch the appliance on if turned over or not in the
operating position.
• Keep the appliance out of reach of other persons,
especially children and pets.
•
All parts on the product must be checked regularly for
sign of a damage or aging. The product may not be
used, if its condition is not intact.
•
Use only original spare parts for the maintenance.
• Any repairs can only be executed by an electrician.
•
Before putting the appliance into operation and after any
impact check it for any wear-out or damage and have
necessary repairs executed.
• This product is not a toy for children! Children can not
estimate risks caused by this product. Never let children
use this product.
• Persons unable to operate the appliance due to their
physical, sensory or mental abilities or their
inexperience or lack of knowledge must not operate it.
• If the appliance show any sign of visible damage the
appliance must not be put into operation.
•
Repairs of the appliance can only be executed by an
electrician. There might be significant risks as a result
of unauthorised repairs.
•
The same regulations apply for accessories.
Güde GmbH & Co. KG does not answer for damages
caused by:
•
Appliance damage by mechanical influences and
overloading.
•
Any changes to the appliance.
•
Use for any other purpose than that described in the
Operating Instructions.
• Unconditionally follow all safety instructions to
prevent accidents and damage.
Important product-specific safety instructions
• The unit should be safely attached to the bench
horizontally.
•
Your work place should be kept clean and sufficiently lit
(500 lux).
•
Never use the unit close to flammable materials, gases
and liquids.
• Wear protection goggles, ear protectors and suitable
protection clothing. Use a respirator if necessary.
•
Wear clothes fitted to the occasion. Do not wear loose
clothing or jewels that could be caught by rotating parts.