Publicité
Les langues disponibles
Les langues disponibles
GB
For passing on the power supply, the inline jack (5)
of the master unit may be connected to the plug (4) of
the first slave unit. Connect the inline jack (5) of the first
slave unit to the plug (4) of the second slave unit etc.
For power supply, a maximum of 32 units may be con-
nected. The next 32 units must be connected to
another mains socket via a separate mains cable.
5.2 Connecting the controller
For a more convenient control and for integrating the
units into a DMX-controlled lighting system, connect
the controller RGBL-100C (to be ordered separately)
to the control signal input (3) of the master unit. If
required, use the extension cable RGBL-105EC.
6 Operation
With no controller connected, all adjustments on the
master unit are made via the DIP switches (2); the
switches of the slave units are of no significance.
6.1 Number of units
Via the DIP switches No. 1 and No. 2, the number of
interconnected units can be adjusted.
Switch
1
2
↑OFF
↑OFF
ON
↓
↑OFF
ON
↓
↑OFF
ON
ON
↓
↓
This adjustment will define, for example, the repetition
rate of the running light effects; for creating special
effects, a different number than the actual number of
units can be adjusted.
6.2 Operating mode
Via the DIP switches No. 3 and No. 4, select the oper-
ating mode.
Switch
3
4
↑OFF
↑OFF
ON
↓
↑OFF
ON
↓
↑OFF
ON
ON
↓
↓
The four operating modes with their variants can be
found below.
Select the corresponding variant with the DIP
switches Nos. 7 – 9.
8
OFF
¤ ¤
ON
Number of units connected
32
16
8
≤4
Operating mode
automatic programme run
sound-controlled change of colour
sound pulse display
permanent light
6.2.1 Automatic programme run
Switch
3
4
↑OFF
↑OFF
Switch
7
8
9
↑OFF ↑OFF ↑OFF
ON ↑OFF ↑OFF
↓
change of colour as a running light
ON ↑OFF
↓
with a single colour in one direction
↑OFF
change of colour as a running light
ON
ON ↑OFF
with a single colour in two directions
↓
↓
ON
↓
↑OFF ↑OFF
ON ↑OFF
ON
↓
↓
stroboscopic effect with changing
ON
ON
↓
↓
↑OFF
ON
ON
ON
stroboscopic effect with white light
↓
↓
↓
6.2.2 Sound-controlled change of colour
Switch
3
4
sound-controlled change of colour
↓ON
↑OFF
Switch
7
8
9
↑OFF ↑OFF ↑OFF
ON ↑OFF ↑OFF
one direction, change of colour
↓
change of colour as a running light
ON ↑OFF
with a single colour in one direction
↓
↑OFF
change of colour as a running light
ON
ON ↑OFF
↓
↓
with a single colour in two directions
ON
↓
↑OFF ↑OFF
ON ↑OFF
ON
↓
↓
ON
ON
↓
↓
↑OFF
ON
ON
ON
↓
↓
↓
Operating mode
automatic programme run
Effect variant
colour transitions
random order of variants
multi-coloured running light
in one direction
multi-coloured running light
in two directions
colours
Operating mode
Effect variant
random order of variants
two-coloured running light in
depending on sound
multi-coloured running light
in one direction
multi-coloured running light
in two directions
sound-dependent immediate
change of colour
sound-dependent immediate
change of colour with
stroboscopic effect
Publicité
