Dometic FlyTec FT200
2
Safety instructions
Please observe the safety instructions and stipulations issued by the vehicle
manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
•
Faulty assembly or connection
•
Damage to the product resulting from mechanical influences
•
Alterations to the product without express permission from the manufacturer
•
Use for purposes other than those described in the operating manual
A
NOTICE!
•
If you do not have sufficient technical knowledge for installing
components in vehicles, you should have a specialist install the fly-
screen in your vehicle.
•
Check whether the dimensions of the flyscreen fit your vehicle.
•
Installation of the flyscreen requires two people.
3
Scope of delivery
No. in
fig. 1,
Quantity
page 3
1
2
3
4
5
6
7
8
–
The screws for fastening on the vehicle are not included in the scope of delivery.
EN
Description
1
Skirting board
1
Cassette profile with flyscreen and guide cables
1
C pillar cover
7
Blind rivet (4 x 8 mm with stainless steel mandrel)
1
Fastening screw M5 x 30 mm and M5 nut
1
Guide rail above
1
Safety clip and screw M2.5 x 6
1
Deflection screw M4 with safety clip and screw M2.5 x 6
Installation and operating manual
Safety instructions
9