Batteries - DeVilbiss Healthcare Drive ENVOY Mode D'emploi

EN
Warning light
Press the warning light button once to switch on the
warning light system. Press the button again to switch
off the function. When the button is pressed, the warning
light function causes all indicators to blink and the horn
sounds.
Seat
The seat can be rotat-
ed 360° and snaps into
place in 45° increments.
To rotate the seat, pull
the lever (A) under the
left side of the seat up-
wards and then rotate
the seat. Release the le-
ver and continue rotat-
ing the seat until it snaps
into place.
You can adjust the space
for your feet on the elec-
tric scooter by pushing the seat back and forth. To shift
the seat, pull the handle for shifting the seat (B) upwards.
Then place the seat in the proper position, release the
handle, and continue pushing the seat until it snaps into
place.
Removing the seat: Pull lever A upwards and rotate the
seat approx. 10° to the left and lift it up.
Mounting the seat: Before putting the seat on again, pull
lever A upwards once again and put the seat fully on.
Then release lever A. After correct mounting, the seat
must once again snap into place in 45° increments.
Important: You must hear and feel the seat snap into
place.
Caution: Bring the seat back into the forward position
before you drive.
Adjusting the armrest
First, unscrew the star screws at the back on the seat
frame (A), then adjust the distance between the armrests
by moving them. Once the correct distance has been
adjusted, secure the screws once again. To adjust the
heights of the armrests, unscrew the star screws directly
on the armrests (B) and adjust the height by moving the
armrests. Retighten the screws.
B
A
22
Drive Medical GmbH & Co. KG | As per: 10.08.2020 | Errors and alterations excepted
B
A
Adjusting the steering column
The steering column can
be adjusted in various
positions:
• Unscrew the screw
to adjust the steering
column in the desired
position. Retighten the
screw.
Neutral lever
The neutral lever en-
ables a release of the au-
tomatic brake so that the
electric scooter can be
pushed and/or maneuvered by hand.
To allow the scooter to be moved, the scooter should be
switched off.
In neutral mode the brakes do not grip, therefore it should
not be used if:
1. Someone is sit-
ting in the electric
scooter
2. The electric scooter
is left unattended
3. The electric scooter
is on a slope
Driving mode/neutral
mode
Driving mode:
Move the lever to Drive:
The electric scooter is
driven by a motor.
Neutral mode:
Move the lever to Neutral: The electric scooter is in neu-
tral mode and can now be pushed/moved by hand.

Batteries

Battery display
The battery charge status can be read on this display.
Green shows a remai-
ning charge of (40~100%)
Yellow shows a dischar-
ging of (10~30%)
Red shows that the bat-
tery must be recharged
as soon as possible.
The remaining charge
indicated by the battery
display depends on the
driving time and your dri-
ving style. Repeated starting and stopping and traveling
uphill use up the remaining energy more quickly.
5
Instructions for use ENVOY