SilverCrest HG03661 Instructions D'utilisation Et Consignes De Sécurité page 8

Avoid the risk of fatal
injury from electric
shock
product dry.
product near bathtubs, showers,
basins or other vessels contain-
ing water.
falls into the water, immediately
remove the plug-in mains adap-
ter from the mains socket before
you reach into the water.
the plug-in mains adapter with
moist or wet hands, especially
when you plug it into the socket
or pull it out of the socket.
the product or the supply cord
with the plug-in mains adapter
and charging base in water or
any other liquid and never rinse
this/these under running water.
product while bathing.
For additional protection, the
installation of a residual current
device (RCD) having a rated re-
sidual operating current not ex-
ceeding 30 mA is advisable in
the electrical circuit supplying
8 GB/IE/NI
Keep the
Do not use this
If the product
Never touch
Never submerge
Do not use the
the bathroom. Ask your installer
for advice.
Only use the original plug-in
mains adapter supplied for
mains operation.
Remove the plug-in mains
adapter from the socket
- if a malfunction occurs,
- before you clean the product,
- if you have not used the
product for a long time,
- during a thunderstorm and
- after each use.
When doing so, remove the
plug-in mains adapter directly
from the socket and do not pull
it out using the supply cord.
Avoid risk
of injury
Do not change the accessories
while the product is switched on.
Do not use the product if you
detect any kind of visible,
external damage. Never use a
damaged product.
If liquid gets into the product,
check before using the product
once more.
If you notice that the supply
cord, plug-in mains adapter,
housing or another part has