Télécharger Imprimer la page

Roller Grill PSF 400 E Notice D'installation Et D'utilisation page 15

Publicité

Les langues disponibles

Les langues disponibles

Putting on
Turn on the thermostat control knob (n°3 on picture) on the wished position: the
green pilot light (n°1 on picture) and the orange pilot light (n°2 on picture) ignite.
The machine is warming up. Once orange pilot light (n°2 on picture) is off, the
machine reached the wished temperature.
Grease the plates before each cooking.
Temperature setting
Set the temperature by positioning the thermostat (n°3 on picture) to the desired
temperature. The orange pilot light (n°2 on picture) switches on if a higher level
of temperature is required and switches off when the same is reached.
It is not necessary to leave the device switched on at full power. It is necessary
to adapt the temperature to products to be cooked to limit the energy con-
sumption.
If your food sticks on the plate, reduce the temperature of the thermostat.
Stopping the appliance
Set each control knob (n°3 on picture) on 0: the green pilot light (n°1 on picture)
switches off. The appliance is no longer functioning.
Let the device cool
Disconnect the power cable.
Clean the appliance. (see 6. Cleaning)
Grease the plate
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service and
confide any technical operation to qualified person.
When you contact the after-sales service of your distributor or your store, give him
the complete reference of your device (commercial name, type and serial number).
This information appears on the visible descriptive plate behind the device.
6. CLEANING AND MAINTENANCE
Disconnect the device.
- Let cool completely the device before any technical intervention or cleaning.
- For cleaning of plate, only use non-abrasive products, clean regularly the external
walls of your device with warm water and wash liquid: avoid the abrasive towelling.
Rinse your device with a wet sponge.
- Remove and empty the tray (n°5 on picture) filled with fats and cooking juice.
- Clean the tray (n°5 on picture) with a wet sponge and some dishwashing liquid (can
also be washed in a machine) and wipe.
- After the tray (n°5 on picture) dries, put it back in the appliance.
15

Publicité

loading

Ce manuel est également adapté pour:

Psf 600 e