Declaration Of Conformity - ALLURIS FMI-100 Notice D'utilisation

A.1 Declaration of Conformity
Manufacturer:
Nidec-Shimpo Corp.
Nagaokakyo City, Japan
on behalf of
Alluris GmbH & Co. KG
DE 79100 Freiburg, Germany
Product:
Digital Force Gauge
Model Nos.:
FMI-100xx; FMI-200xx; FMI-210xx; FMI-220xx; FMI-230xx; FMI-300xx; FMI-400xx
We hereby confirm that the product complies with the requirements of the EMC Directive 92/336/EEC and
conforms the following specification:
EMC Directive 92/336/EWG
EN 55022 (RF Emission)
EN 61000-4-2 (ESD)
EN 61000-4-3 (RF Field)
EN 61000-4-4 (Burst)
EN 61000-4-8 (Magn. Field)
In accordance to WEEE Directive 2002/96/EC this device is categorized as "Monitoring and Control Instrument"
and should not be disposed as unsorted municipal waste. You may return it to Alluris for recycling. (WEEE
Reg.No. DE 49318045) For more information please contact our website www.alluris.de.
The compliance to the requirements of all applicable EU directives is confirmed by the CE-marking of the
product.
A.2 Calibration Confirmation
We hereby confirm in accordance to DIN EN 10204, 2.1 that this instrument has been tested in accordance with
DIN EN 9001:2000 approved procedures. The instrument meets all specified technical data's and the accuracy
was tested better than the accuracy stated in the technical data.
The equipment and weights used for test and calibration are traceable to the international recommended and
approved standards of the National Research Laboratory of Metrology, Japan and the Institute of Standards,
Prefecture Kyoto, or the DKD Detuscher Kalibrierdienst at the Physikalisch-Technischen Bundesanstalt (PTB).
Manufacturer:
Nidec-Shimpo Corp.
Nagaokakyo City, Japan
Model No.: ..............................................
Serial No.: ...............................................
Date of Purchase: ...................................
Class B
Criteria A
Criteria A
Criteria A
Criteria A
Alluris GmbH & Co.KG
Freiburg, Germany
83