Charging The Battery; Changing The Battery - ALLURIS FMI-100 Notice D'utilisation

Extension (FMI-966 M4 / FMI-966 M6 /
FMI-966 M10)
Hanger (20078)
RS232C-interface cable (FMI-931 PC)
USB-interface cable (FMI-931 USB)
Fmi_Connect Software (FMI-972)
Calibration protocol with data (FMI-800)
Should, albeit our issuing check, parts be missing, please refer to your stockist or to us at service@alluris.de
immediately.

2.2. Charging the battery

The gauges are provided with chargeable NiCd- and NiMH cells. Before using the instrument for the first time,
fully charge the internal battery. While charging, the battery indicator (BAT) is displayed; it will be off when the
battery is fully charged after 12h max.. In order to achieve a possibly long life cycle of the rechargable battery
(>500 charging cycles) you should re- and dis-charge them fully. The instrument can be used during the charging
process.

2.3. Changing the battery

The battery should be changed by authorised and qualified personnel only. The rechargeable batteries`
capacity of those instruments, which are sent to Alluris for checkup, is examined free of charge and, if
necessary, a free replacement (apart from material costs) is performed as part of the functional check.
3.0 Overview
3.1. FMI-100 ⏐ FMI-200 ⏐ FMI-210 ⏐ FMI-300 ⏐ FMI-400
1 Operating keys:
1.1 I/O-button to turn instrument on and off;
1.2 >>O<<-button to tare and zero-adjust the gauge;
(-/ /-) ( / /-) ( / /-)
(-/ /-) ( / /-) ( / /-)
-
20
( / /-) ( / /-)
( / /-) ( / /-)
FMI-100 | FMI-300
FMI-200 | FMI-210 | FMI-400
FMI-220 | FMI-230
(-/-/ ) (-/-/ )
(-/-/ ) (-/-/ )
-