Paso ITC2000-C Manuel D'utilisation page 12

Table des Matières

Publicité

'MANUAL 2' (LED ARANCIO ACCESO)
In assenza di comunicazione, il canale Operatore viene mantenuto attivo.
Tasto 'TALK'
Spegnimento
Tasto 'MODE ON/OFF' Tenendo premuto questo tasto per più di
12
In questo tipo di funzionamento, il tasto
risulta disabilitato.
Premendo questo tasto, viene abilitato il
Cliente : il led rosso si accende.
Premendo questo tasto, la comunicazione
in uscita dell' Operatore viene diffusa
nell'impianto PA.
Il led verde si accende, ritornando poi
arancio al rilascio.
1,5 sec., si ottiene lo spegnimento della
postazione (funzione OFF).
'MANUAL 2' (ORANGE LED ILLUMINATED)
When no communications are taking place, the Operator channel is kept
active.
'TALK' key
Switching off
'MODE ON/OFF' key
With this type of operation, the key is
disabled.
On pressing this key, the Customer is
enabled: the red LED lights up.
On pressing this key, the outgoing
message from the Operator is broadcast
via the PA system.
Green LED will light up, returning to
orange on release.
When this key is held down for more than
1.5 seconds, the station will switch off
(OFF function).

Publicité

Table des Matières
loading

Table des Matières