Flange Mounting - Emerson AVENTICS RAK Mode D'emploi

Fig. 11: Flange mounting
Table 5: Dimensions, flange mounting
For size A
1 30
2 37
3 42
4 50
5 64
6 80
7 110
AVENTICS
6.6

Flange mounting

Fit the flange mounting to the front end of the rotary actuator
1.
using screws supplied. The flange for size 2 and 3 can be fitted
in steps of 120
Attach the flange to a base by using suitable screws or bolts.
2.
See Table 5, screw (C).
Tighten the screws gradually to avoid strain. See Table 5 for
3.
tightening torque.
B C D
24 3.4 2.0
30 3.4 2.5
34 3.5 3.2
41 5.5 3.6
52 5.5 3.6
64 7.0 4.5
88 9.0 6.0
| RAK | R402005099–BDL–001–AB
°
from the reference position.
Screw
E
∅
(C)
14.0 M3
16.5 M3
19.8 M3
24.9 M5
27.9 M5
35.0 M6
47.5 M8
47
Tightening torque
(class 8.8)
1.2 Nm
1.2 Nm
1.2 Nm
6 Nm
6 Nm
10 Nm
24 Nm