Publicité
Les langues disponibles
Les langues disponibles
7.3
Cycle selection
Upon the appliance switch ON the manufacturer's logo is displayed together with the
firmware version.
After 3 seconds have elapsed the display shows:
Press
SELECT
to scroll programs.
Press
START
to start the selected cycle.
7.4
Cycles standard setup
The appliance comes with the following default parameters:
Disinfectant / detergent infeed
Heating
Degas function
SWEEP function
Ultrasound cleaning
Drying
Parameters can be modified for all cycles.
7.5
Cycle changes
Select the cycle to be modified.
Press
OK
to display the MENU.
Available parameters:
Description
Disinfectant / detergent infeed
Heating
Degas function
SWEEP function
Ultrasound cleaning
Drying
Press
OK
to scroll the cycle parameters.
Press
SELECT
to modify the value of the selected parameter.
The menu of the parameters and setup scrolls circularly.
Once the setup is completed select EXIT and press
Changes are saved.
A
B
2 %
4 %
30 ° C
NO
SI
SI
NO
SI
20 min
20 min
SI
SI
Parameters
0 ÷ 6 %
30 ÷ 60 ° C
SI - NO
SI - NO
0 ÷ 30 min
SI - NO
SELECT
to quit the MENU.
ENGLISH
C
NO
30 ° C
SI
NO
5 min
SI
Step
1%
10 ° C
-
-
1 min
-
15
Publicité
Chapitres
