Introduction; Device Description; Scope Of Delivery; Intended Use - Scheppach SD1600V Traduction Du Manuel D'origine

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working expe-
rience with your new scheppach Scroll Saw.
Note:
According to the applicable product liability law the
manufacturer of this device is not liable for damages
which arise on or in connection with this device in
case of:
• improper handling
• non-compliance with the instructions for use
• repairs by third party, non authorized skilled
workers
• installation and replacement of non-original spare
parts
• improper use
• failures of the electrical system due to the non-
compliance with the electrical specifications and
the VDE 0100, DIN 57113 / VDE 0113 regulations
Warning
To avoid electrical hazards, fire hazards, or damage
to the tool, use proper circuit protection.
Your drill press is wired at the factory for 230 V opera-
tion. Connect to a 230 V/15 amp branch circuit and
use a 15 amp time delay fuse or circuit breaker. To
avoid shock or fire, replace power cord immediately if
it is worn, cut or damaged in any way.
Recommendations:
Read the entire text of the operating instructions
prior to the assembly and operation of the device.
These operating instructions are intended to make it
easier for you to get familiar with your device and uti-
lize its intended possibilities of use.
The operating instructions contain important notes on
how to work safely, properly and economically with
your machine and how to avoid dangers, save repair
costs, reduce downtime, and increase the reliability
and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable reg-
ulations of your country with respect to the operation
of the machine.
Put the operating instructions in a clear plastic folder
to protect them from dirt and humidity, and store them
near the machine. The instructions must be read and
carefully observed by each operator prior to starting
the work. Only persons who have been trained in the
use of the machine and have been informed on the
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
GB FR IT
DE
PL CZ SK SI
related dangers and risks are allowed to use the ma-
chine. The required minimum age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of
your country, the generally recognized technical rules
for the operation of wood working machines must be
observed.
2. Device description (Fig. 1+2)
1. Clamping lever: for removing the saw blade.
2. Blade guard: protects your hands from injury.
3. Work piece holder
4. Shavings blower: keeps the workpiece area
free from dust.
5. electronical speed switch deco 402: Speed
switch
6. On/Off switch
7. Angle scale: you can read the angle position
of the table with this scale.
8. Lighting
9. On/off switch lighting
10. Table insert
11. Toolbox

3. Scope of delivery

• When you unpack the device, check all parts for
possible transport damages. In case of complaints
the supplier is to be informed immediately.
• Complaints received at a later date will not be
acknow ledged.
• Check the delivery for completeness.
• Read the operating instructions to make yourself
familiar with the device prior to using it.
• Only use original scheppach parts for accessories
as well as for wearing and spare parts. Spare parts
are available from your specialized dealer.
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
m ATTENTION
The device and packaging materials are not
toys! Children must not be allowed to play with
plastic bags, film and small parts! There is a
risk of swallowing and suffocation!

4. Intended use

CE tested machines meet all valid EC machine
guidelines as well as all relevent guidelines for
each machine.
• The machine must only be used in technically
perfect con dition in accordance with its designated
use and the in structions set out in the operating
manual, and only by safety-conscious persons who
are fully aware of the risks involved in oerating the
machine. Any functional dis orders, especially those
affecting the safety of the machine, sholud terefore
EE LV LT NL
17 / 116