Safety Devices; Use According To Intended Purpose; Residual Risks - Mafell KSS40 18 M bl Traduction De La Notice D'emploi Originale

1 carrying case Max
1 operating manual
1 folder "Safety Instructions"
2 clamping claws for Item No. 91B301, 91B321, 91B323, 91B325
1 FLEXI rail FX 140 for cutting length max. 140 cm (55 in.) for Item No. 91B301, 91B321, 91B323, 91B325
1 charger APS 18 M for Item No. 91B301, 91B321, 91B323, 91B325
2 rechargeable batteries 18 M 99 LiHD for Item No. 91B301, 91B321, 91B323, 91B325
1 chip bags

2.6 Safety devices

Danger
These devices are required for the
machine's safe operation and may
not be removed or rendered
inoperative.
The machine is equipped with the following safety
devices:
- Upper stationary saw guard
- Lower retractable saw guard
- Large base plate
- Handles
- Riving knife / splitter
- Index mechanism and brake
- Hose connector

2.7 Use according to intended purpose

The MAFELL cross-cutting system is exclusively
suited for longitudinal and cross cutting of solid wood.
Panel materials such as chip board, core board and
medium density fibre board can also be processed.
Use approved saw blades according to EN 847-1.
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
So as to use the machine as intended, comply with
the operating, maintenance and repair instructions
specified by Mafell.
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
Battery packs marked with CAS are 100% compatible
with CAS devices (Cordless Alliance System).

2.8 Residual risks

Danger
Even if used in accordance with its
intended purpose and despite
conforming with the safety
instructions, residual risks caused
by the intended use will always
remain.
- Touching the saw blade in the vicinity of the
starting aperture below the base plate.
- Touching the part of the saw blade that protrudes
below the workpiece when cutting.
- Touching of turning parts from the side: saw blade,
clamping flange and flange screw.
- Machine backlash if the blade gets stuck in the
workpiece.
- Breakage of the saw blade and risk of the blade or
pieces of the blade being hurled away.
- Accidental activation if rechargeable battery is not
unplugged.
- Hearing can be impaired when working for long
periods without ear protectors.
- Emission of harmful wood dusts during longer
operation without extraction.
- Snapping open of the FLEXI rail if used improperly.
-22-