Cooper Surgical LEEP PRECISION LP-10-120 Manuel D'utilisation page 30

13.3 LEEP PRECISION Smoke Evacuator
Input Voltage 120 VAC, 60 Hz
Fuses
15 amps, 250V, T-Type 10 amps, 250V, T-Type
DIMENSIONS (W x D x H): . . . . . . . . . . . 9 inches x 9 inches x 22 inches
WEIGHT: . . . . . . . . . . . . . . . . . . . . . . . . 21 pounds (9 .53 kg)
AIR FLOW: . . . . . . . . . . . . . . . . . . . . . . . 35 CFM minimum at maximum setting
FILTER: . . . . . . . . . . . . . . . . . . . . . . . . . Pre-Filter, charcoal filter for odor removal and hydrophobic
13.4 LEEP PRECISION Cart with Integration Unit
DIMENSIONS (W x D x H): . . . . . . . . . . . . 22 .44 inches x 22 .07 inches x 41 .22 inches
WEIGHT: . . . . . . . . . . . . . . . . . . . . . . . . . approx . 54 pounds (24 .50 kg)
See the Power Output Characteristics and Power Output at
Various Load Resistance graphs on the next two pages
LEEP PRECISION Integrated System Cautions
• No modification of this equipment is allowed.
• No customer serviceable parts
• Only replacement of power cords or fuses can be done by the user . Only replace with these items with the
exact replacement part(s) available from CooperSurgical .
• Position the LEEP PRECISION Integrated System to maintain access to the power outlet it is plugged into
to assure ease of disconnection from the power source if needed .
• To remove all power from the LEEP PRECISION Integrated System, disconnect the power cord from
the wall outlet .
• To avoid risk of electrical shock, this equipment must only be connected to a supply mains with
protected earth .
Environment Conditions
Environmental Temperature
Relative Humidity
Air Pressure
WEEE Directive
In order to preserve, protect and improve the quality of the environment, protect human health and
utilize natural resources prudently and rationally – do not dispose of waste electrical or electronic
equipment (WEEE) as unsorted municipal waste . Contact local WEEE disposal sites .
230 VAC, 50/60 Hz
(22 .86 cm x 22 .86 cm x 53 .24 cm)
ULPA filter rated at 99 .999 percent efficiency level for
0 .014 micron particles based on Standard CNC Evaluations
(57 .0 cm x 56 .06 cm x 104 .70 cm)
Use
between +10 °C and +40 °C
between 10% and 90%
between 700 hPa and 1060 hPa
30
Shipping and Storage
between +10 °C and +40 °C
between 10% and 90%
between 700 hPa and 1060 hPa