Settings; Before First Use; Daily Use - ARTHUR MARTIN AWF8240SXM Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The related phase indicator on the control
panel comes on.
Lessive Liquide
Press this button to adapt the cycle if you
use a liquid detergent.
The related indicator comes on.

SETTINGS

ACOUSTIC SIGNALS
The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Rinçage Plus
Départ Différé
at the same time for 6
seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
CHILD LOCK
With this option you can prevent that the
children play with the control panel.

BEFORE FIRST USE

1. Make sure that the electrical and water
connections comply with the
installation instructions.
2. Remove the polystyrene block and any
material from the drum.
3. Put a small quantity of detergent in the
compartment for washing phase.

DAILY USE

WARNING! Refer to Safety
chapters.
Loading the laundry
1. Open the appliance door
2. Shake the items before you put them
in the appliance.
Départ Différé
With this option you can delay the start of
a programme from minutes to hours.
The display shows the related indicator for
example:
• To activate/deactivate this option,
press Prélavage
You can activate this option:
and
• After you press
the programme knob are locked.
• Before you press
cannot start.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
.
and Rinçage Plus
at the same time until the indicator
comes on/goes off.
: the options and
13
: the appliance

Publicité

Chapitres

Table des Matières
loading

Table des Matières