Départ différé
With this option you can delay the start of
a programme by 9, 6 or 3 hours.
SETTINGS
Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Essorage and Rapide at the
BEFORE FIRST USE
During installation or before
first use you may observe
some water in the appliance.
This is residual water left in the
appliance after a full functional
test in the factory to ensure the
appliance is delivered to
customers in perfect working
order and is no cause for
concern.
DAILY USE
WARNING! Refer to Safety
chapters.
Loading the laundry
1. Open the appliance lid.
2. Push the button A.
The drum opens automatically.
3. Put the laundry in the drum, one item
at a time.
4. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
5. Close the drum and the lid.
The indicator of the set value is on.
same time until the indicator
on/goes off.
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in the
compartment for washing phase.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
11
comes
A