Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Carefully close the detergent drawer.
Setting a programme
1. Turn the programme knob to switch
the appliance on and set the
programme:
• The indicator of the button
flashes.
• The display shows the programme
duration.
2. If necessary, change the temperature
and the spin speed or add available
options. When you activate an option,
the indicator of the set option comes
on.
If you set something incorrect,
the display shows the message
.
Autosense function
At the start of the programme, the display
shows the programme duration for the
maximum load capacity. During the
washing phase the programme duration is
automatically calculated and can be
greatly reduced if the laundry load is lower
than the maximum load capacity. When
the appliance is calculating the real
programme duration the display is
alternatively showing the " loading "
animation
and the max load capacity
time duration .The new time duration is
appearing when calculation is finished.
(e.g. Cotton 30° programme , maximum
load capacity 8 kg , the default
programme duration exceeds 2 hours, in
case of actual load 2 kg, the program
duration will be reduced to only 1 hour 20
min).
Starting a programme without
the delay start
Press the button
• The indicator of the button
stops to flash and stays on.
• The programme starts, the door
locks, the indicator
• The programme time decreases
with steps of one minute.
The drain pump can operate for
a short time at the beginning of
the washing cycle.
Starting a programme with the
delay start option
1. Press the button Départ Différé
again and again until the display
shows the delay you want to set. The
delay start indicator comes on.
2. Press the button Départ/Pause
• The door is locked and the indicator
is on.
• The appliance starts the
countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the Départ Différé
option before you press the
button Départ/Pause
pressing the button Départ/
Pause
the Départ/Pause option.
To cancel the Départ Différé
a. Press the button Départ/Pause
to set the appliance to pause. The
indicator of button
b. Press the button Départ Différé
until the display shows
.
is on.
. After
you can only cancel
option:
flashes.
.
15
:
Publicité
Chapitres
Table des Matières
