ARTHUR MARTIN AWF8240SXM Notice D'utilisation page 12

12
To drain the water refer to 'At
the end of the programme'.
Night Cycle
• Set this option to remove all spin
phases and to perform a silent
washing.
• The rinse phase uses more water for
some washing programmes.
• The related indicator comes on.
• The washing programme stops with the
water in the drum. The drum turns
regularly to prevent the laundry
creases.
• The door stays locked. You must drain
the water to unlock the door.
• The display shows the indicator
To drain the water refer to 'At
the end of the programme'.
Time Manager
When you set a washing programme, the
display shows the default duration.
Press or to decrease or increase the
programme duration.
The Time Manager is available only with
the programmes in the table.
1) ■ ■
■ ■
■ ■
■ ■
■ ■
.
■ ■
■ ■ ■
■ ■
■ ■ ■ ■
■ ■
2)
■ ■
■ ■
3) ■ ■
1) Shortest: to fresh the laundry.
2) Programme default duration.
3) Longest: Increasing the programme duration gradu‐
ally decreases the energy consumption. The optimized
heating phase saves energy and the longer duration
maintains the same washing results (specially for nor‐
mal soil).
Some advices to have the most
efficient setting:
• Set the Time Manager indicators
.
• Set the possible lower washing
temperature.
• Do not set the Prewash option.
Prélavage
With this option you can add a prewash
phase to a washing programme.
Use this option for heavy soil.
When you set this option the programme
duration increases.
The related indicator comes on.
Rinçage Plus
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
2) 2)
■
■
■
2) ■ 2)
■ ■
2)
■
■
■
or