Maintenance And Cleaning; Handling - Conrad Electronic KeyMatic KM300RI Notice D'emploi

11. Maintenance and Cleaning

The product does not require any maintenance. You should never take it apart.
If you wish to clean the product, disconnect it from the power supply (pull out
the mains unit from the power socket).
To clean it use a dry, soft and clean cloth only. Dust can be removed using a
clean brush and a vacuum cleaner.

12. Handling

Take note of all the safety instructions in these operating
instructions!
The product is not a toy and should be kept out of reach of children! Install the
product out of reach of children.
The following unfavorable conditions at the installation site, during operation
or transport are to be avoided:
- wetness or too high air humidity
- extreme coldness (<0°C) or heat (>50°C), direct sunlight
- dust or flammable gases, fumes or solvents
- strong vibrations, shocks, impacts
- strong magnetic fields such as near machines or loudspeakers
The product is only to be used in dry indoor locations. It must not
be wet or damp, otherwise there may be danger of electric shock!
Never disassemble the product.
When assembling the device, make sure the cables are not bent or jammed.
Place the cables in a way so that nobody can trip over it.
38