Limited Warranty - Hatco Glo-Ray GR2A Series Manuel D'installation

OPTIONS AND ACCESSORIES
Sneeze Guards
Sneeze guards are available for all models. They are available
in sizes of 7-1/2" (191 mm) and 14" (356 mm). Sneeze guards
can be installed on either one side or both sides of the unit.
1. Remove protective paper from the sneeze guards.
2. Position the sneeze guard into the channel on the warmer
with the mounting holes aligned.
3. Secure the sneeze guard using the thumbscrews and
acorn nuts provided. Tighten thumbscrew until snug. Do
not over-tighten.
Non-Adjustable Stands
Non-adjustable stands are available in heights of 10" (254 mm),
12" (305 mm), 16" (406 mm), in lieu of 14" (356 mm) standard legs.
Designer Color Inset Panels
Choose from several Designer colors to coordinate the inset
panels on the foodwarmer to surrounding decór.
NOTE: This option is factory-installed only, not available for
retrofit.

LIMITED WARRANTy

1. PRODUCT WARRANTy
Hatco warrants the products that it manufactures (the
"Products") to be free from defects in materials and
workmanship, under normal use and service, for a period of
one (1) year from the date of purchase when installed and
maintained in accordance with Hatco's written instructions or
18 months from the date of shipment from Hatco. Buyer must
establish the Product's purchase date by registering the
Product with Hatco or by other means satisfactory to Hatco in
its sole discretion.
Hatco warrants the following Product components to be free
from defects in materials and workmanship from the date of
purchase (subject to the foregoing conditions) for the period(s)
of time and on the conditions listed below:
a) One (1) year Parts and Labor PLUS One (1) Additional
year Parts-Only Warranty:
Conveyor Toaster Elements (metal sheathed)
Drawer Warmer Elements (metal sheathed)
Drawer Warmer Drawer Rollers and Slides
Strip Heater Elements (metal sheathed)
Display Warmer Elements (metal sheathed air heating)
Holding Cabinet Elements (metal sheathed air heating)
Heated Well Elements — HW and HWB Series
(metal sheathed)
b) Two (2) year Parts and Labor Warranty:
Induction Ranges
c) One (1) year Parts and Labor PLUS Four (4) years
Parts-Only Warranty:
3CS and FR Tanks
d) One (1) year Parts and Labor PLUS Nine (9) years
Parts-Only Warranty on:
Electric Booster Heater Tanks
Gas Booster Heater Tanks
e) Ninety (90) Day Parts-Only Warranty:
Replacement Parts
Halogen Display Lights
Optional halogen display light bulbs can be ordered in place of
the standard incandescent display light bulbs.
THE FOREGOING WARRANTIES ARE EXCLUSIVE AND IN
LIEU OF ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE
INTELLECTUAL PROPERTY
Without limiting the generality of the foregoing, SUCH
WARRANTIES DO NOT COVER: Coated incandescent light
bulbs, fluorescent lights, heat lamp bulbs, coated halogen light
bulbs, halogen heat lamp bulbs, xenon light bulbs, LED light
tubes, glass components, and fuses; Product failure in booster
tank, fin tube heat exchanger, or other water heating equipment
caused by liming, sediment buildup, chemical attack, or
freezing; or Product misuse, tampering or misapplication,
improper installation, or application of improper voltage.
2. LIMITATION OF REMEDIES AND DAMAGES
Hatco's liability and Buyer's exclusive remedy hereunder will be
limited solely, at Hatco's option, to repair or replacement using
new or refurbished parts or Product by Hatco or a Hatco-
authorized service agency (other than where Buyer is located
outside of the United States, Canada, United Kingdom, or
Australia, in which case Hatco's liability and Buyer's exclusive
remedy hereunder will be limited solely to replacement of part
under warranty) with respect to any claim made within the
applicable warranty period referred to above. Hatco reserves
the right to accept or reject any such claim in whole or in part.
In the context of this Limited Warranty, "refurbished" means a
part or Product that has been returned to its original
specifications by Hatco or a Hatco-authorized service agency.
Hatco will not accept the return of any Product without prior
written approval from Hatco, and all such approved returns shall
be made at Buyer's sole expense. HATCO WILL NOT BE
LIABLE, UNDER
CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LABOR COSTS OR LOST PROFITS
RESULTING FROM THE USE OF OR INABILITY TO USE THE
PRODUCTS OR FROM
INCORPORATED IN OR BECOMING A COMPONENT OF
ANY OTHER PRODUCT OR GOODS.
22
English
OR PATENT OR
RIGHT INFRINGEMENT.
ANY CIRCUMSTANCES,
THE PRODUCTS
Form No. GR2AM-1116
OTHER
FOR
BEING