Publicité
Les langues disponibles
Les langues disponibles
Slide the mains connection lead
the cable entry with the membrane
Fasten the connection housing
screws which are included
Connect the connection cable of the light to
the mains connection lead
lustre terminal
, see fig. C.
10
Also ensure that the colour connection of the
wires is correct when connecting (L or
2 = black or brown, N or 1 = blue or white).
Now connect the earth wire (3 = green-yellow)
to the marked earth terminal
Now place the wall plate
connection housing
5
nuts
.
3
Check for correct fitting.
Insert the bulb
into the socket carefully and
6
tighten it with a ¼ turn in a clockwise direction.
Place the lamp glass
1
and tighten it. Ensure that the sealing ring on the
lamp glass
is present and in contact (see fig. D).
1
Reinsert the fuse or switch the circuit breaker
back on.
Your light
is now ready for use (see fig. E).
8
Replacing a bulb
CAUTION! RISK OF ELECTRIC SHOCK!
To replace the bulb, first of all disconnect the
light from the mains circuit. To do this, remove
the fuse or switch off the circuit breaker in the
fuse box (0 setting).
Allow the light to cool completely.
Use a dry, lint-free cloth to replace a bulb.
Turn the defective bulb out of the socket with a
¼ turn anticlockwise.
Insert a new bulb in the socket and tighten it
with a ¼ turn clockwise.
Check for correct fitting.
Installation / Cleaning / Disposal / Warranty and Service
through
9
.
11
with the
5
, see fig. B.
7
by means of the
9
(see fig. C).
carefully onto the
4
and fasten it with both
on the light body
2
Cleaning
CAUTION! RISK OF ELECTRIC SHOCK!
Disconnect the light from the mains circuit
before cleaning. To do this, remove the fuse or
switch off the circuit breaker in the fuse box
(0 setting).
Only use a dry, lint-free cloth for cleaning. Do
not use solvents, spirit or similar substances.
They could damage the light.
Allow the light to cool completely.
Reinsert the fuse or switch the circuit breaker
back on.
Disposal
The package and packaging materials consist en-
tirely of environmentally friendly materials. They
can be disposed of at your local recycling facility.
The symbol of the wheelie bin with the
line through it means that, in the European
Union, the product has to be disposed
of in a separate refuse collection. This applies to
the product and to all components bearing this
symbol. Do not dispose of products bearing this
symbol in your normal household waste, but in-
stead they must be taken for recycling to a collec-
tion site for electrical and electronic appliances.
Recycling helps to reduce the consumption of raw
materials and protects the environment.
Warranty and Service
Warranty
You receive a 36 month warranty on this product,
valid from the date of purchase.
The appliance has been carefully produced under
strict quality control.
We will rectify without charge all material and
manufacturing defects within the warranty period.
In the event of a defect arising during the warranty
period, please send the appliance to the listed
Service Centre address, making reference to the
following article number: 3124-022L / 3463-022L.
GB
15
Publicité
