Troubleshooting; Disposal - Mobicool P24 DC/AC Notice D'emploi

_P24_P28_S25_DC-AC.book Seite 12 Dienstag, 21. April 2009 2:40 14

Troubleshooting

7 Troubleshooting
Fault
Your cooler does not func-
tion (plug is inserted, LED
(accessory) does not
glow).
Your cooler does not cool
(plug is inserted, LED
(fig. 4 1, page 4, acces-
sory) glows).
Your cooler does not heat
(plug is inserted, LED
(fig. 4 2, page 4, acces-
sory) glows).
Operation with a 12 V
socket (cigarette lighter):
The ignition is on and the
cooler is not working.
Pull the plug out of the
socket and make the follow-
ing checks.
8

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the device, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
12
P24 DC/AC, P28 DC/AC, S25 DC/AC
Possible cause Suggested remedy
There is no voltage The ignition must be switched on in
flowing from the 12 V most vehicles for voltage to flow at the
socket (cigarette cigarette lighter.
lighter) in your vehi-
cle.
No voltage present at Try using another plug socket.
the AC voltage
socket.
The inner fan or the This can only be repaired by an author-
cooling element is ised customer services unit.
defective.
The inner fan or the This can only be repaired by an author-
cooling element is ised customer services unit.
defective.
The cigarette lighter If the plug of your cooler becomes very
socket is dirty. This warm in the cigarette lighter socket,
results in a poor elec- either the socket must be cleaned or
trical contact. the plug has not been assembled cor-
rectly.
The fuse of the 12 V Replace the fuse (5 A) in the 12 V plug
plug has blown. (fig. 5 1, page 4).
The vehicle fuse has Replace the vehicle's 12 V socket fuse
blown. (usually 15 A). (Please refer to the
operating manual of your vehicle.)